CV

E. Murat Sozer

Koc University
Prof., Mechanical Engineering Department
Director, Koc University Office of Learning and Teaching (KOLT)
Rumelifeneri Yolu, Sariyer, 34450, Istanbul, Turkey

E-mail: msozer@ku.edu.tr
Web (research):https://mysite.ku.edu.tr/msozer/
Web (KOLT): http://kolt.ku.edu.tr
Phone: (+90) 212 338 1582


RESEARCH AREAS @ Composite Materials Manufacturing Lab

  • Manufacturing of fiber reinforced plastic composite materials,
  • Process modeling and control in composites manufacturing,
  • Resin Transfer Molding (RTM) process,
  • Vacuum Infusion (VI) process,
  • Resin flow simulations,
  • Material characterization experiments (permeability and compaction of fabrics),
  • Modeling nonlinear unsteady free-surface flows,
  • Vortex sheet method, strip theory and perturbation method.


LEARNING AND TEACHING SUPPORT @ KOLT

Faculty Members and Programs:

  • Teaching workshops for faculty,
  • Syllabus design,
  • Learning management system (LMS): Blackboard,
  • Blended teaching: lecturing, active learning techniques and on-line supplementary material,
  • Coursera courses (massive open online courses),
  • Mid-semester online course evaluations,
  • Individual consultations to faculty on teaching issues,
  • Class observations and feedback,
  • Teaching innovation grants,
  • Use of educational technology (lecture capturing, clickers, immediate response systems, interactive and online textbook resources),
  • Accreditation and program review support (surveys and focus group studies among students and alumni)

Students

  • One-on-one peer tutoring support with 100+ tutors for 80+ courses per semester,
  • KOLT 101 Academic Skills Development course for struggling students,
  • CPAP 100 Computer Proficiency Assessment Program (word processing and spreadsheets),
  • Basic academic skills workshops for new-coming students,
  • Conversation circles for fluency in English, French, German, Italian, and Spanish,

Teaching Assistants (TAs)

  •  KOLT 500 Training Program for New-coming TAs
  • Effective teaching tips and good practices,
  • Fair and consistent grading,
  • Educational technologies,
  • Microteaching sessions with feedback.

 

EDUCATION

  • Ph.D. in Mechanical Engineering (January 1996)
    University of Delaware, Newark, Delaware, USA
    Research Advisor: Prof. Michael D. Greenberg
    Thesis title: Vortex sheet approach to the nonlinear flow induced by a line source/sink or a moving slender body beneath a free surface
  • Master of Science in Mechanical Engineering (February 1989)
    Middle East Technical University, Ankara, Turkey
    Research Advisor: Prof. Mehmet Caliskan
    Thesis title: Analysis of structurally coupled interior acoustic fields by acoustoelasticity method
  • Bachelor of Science in Mechanical Engineering (July 1986)
    Middle East Technical University, Ankara, Turkey

 

EXPERIENCE

Director, Koc University Office of Learning and Teaching (KOLT) (September 2012 – present)
Professor (June 2019 – present)
Associate Professor (June 2009 – June 2019)
Assistant Professor (September 2000 – June 2009)
Head of Mechanical Engineering Department (August 2012 – April 2013)
Koc University, College of Engineering, Mechanical Engineering Dept., Istanbul, Turkey

  • Courses offered (recently):

Academic Year

Semester

Course Title

Number of Students

Instructor Evaluation*

(+3 to -3 scale)**

2013-2014

Fall

MECH 201 Statics and Mechanics of Materials

79

2.76

Spring

MECH 307 Numerical Methods for Mechanical Eng.

10

3.00

2014-2015

Fall

MECH 201 Statics and Mechanics of Materials

68

2.90

Spring

MECH 307 Numerical Methods for Mechanical Eng.

46

2.93

2015-2016

Fall

MECH 201 Statics and Mechanics of Materials

71

2.88

Spring

MECH 307 Numerical Methods for Mechanical Eng.

45

2.81

2016-2017

Fall

MECH 201 Statics and Mechanics of Materials

62

2.92

Spring

MECH 307 Numerical Methods for Mechanical Eng.

22

2.94

2017-2018

Fall

MECH 201 Statics and Mechanics of Materials

70

2.93

Spring

MECH 307 Numerical Methods for Mechanical Eng.

35

2.92

2018-2019

Fall

MECH 201 Statics and Mechanics of Materials

73

2.94


*: 10 out of 11 last semesters (all except Spring 2016), listed in “Celebration of Learning & Teaching” by being in the top 10% in the college.
**: Scale: +3: extremely good; +2: very good; +1: good; 0: fair; -1: poor; -2: very poor; -3: extremely poor.

  • Courses offered (in the past):
  1. ENG 100 Introduction to Engineering
  2. MATH 101 Finite Mathematics
  3. MATH 102 Calculus
  4. MATH 503 Applied Mathematics
  5. MECH 306 Manufacturing Processes
  6. MECH 541 Manufacturing of Composite Materials
  • Academic Advising & Cumulated Alumni: 100+ undergraduate, 13 MS and 4 PhD students

Post-Doctoral Fellow

University of Delaware, Center for Composite Materials, supervisor: Prof. Suresh G. Advani (June 1997 – August 2000)

  • Development and maintenance of numerical simulations for RTM (resin transfer molding) process,
  • Modeling of RTM stages: draping, preform permeability prediction, and mold filling,
  • RTM experiments,
  • Off-line and on-line design, control and optimization of complete RTM process. 

Technical Editor and Post-Doctoral Fellow

University of Delaware and Prentice-Hall Publishers (January 1996 – June 1997)

  • Camera-ready editing for the Advanced Engineering Mathematics by M.D. Greenberg, Prentice Hall, New York               

Visiting Professor

Mechanical Engineering Dept., University of Delaware (July 1995 – December 1995)

  • MEEG 361 Applied Engineering Analysis (49 Mechanical Engineering juniors)
  • MEEG 863 Advanced Engineering Mathematics I (54 M.S. and PhD students from Mech., Chem., Civil and Ocean Eng.)

Design Engineer

Aselsan Military Electronics Inc., Ankara, Turkey (July 1986 – August 1989)

  • Designing new communication instruments and electronic packaging,
  • Developing prototypes in the machine shop,
  • Tests (vibration, shock, drop and sealing).

HONORS & AWARDS

  • Outstanding University Service Award, Koc University, Office of Learning and Teaching, 2018
  • Editor’s Top Reviewer Award, Journal of Composites Part A: Applied Science and Manufacturing, 2015
  • Outstanding Teaching Award (university wide, when it was organized for the first time in the university history), 2012
  • Outstanding Technical Paper Award, the Composites Manufacturing Association (CMA) of the Society of Manufacturing Engineers (SME) in recognition of outstanding contribution to the composites manufacturing body of knowledge for the technical paper; Composites Manufacturing and Tooling 2000 Conference and Tabletop Exhibits, Newport Beach, California, February 23-25, 2000
  • Excellence in Teaching Award, the Committee on Student and Faculty Honors, University of Delaware, 1994
  • Fellowship by Mechanical Engineering Department, University of Delaware, 1993-1994
  • Competitive and Tuition Fellowship by Graduate Office, University of Delaware, 1992-1993
  • Ranked 2nd out of 190 Mechanical Engineering B.S. graduates, Middle East Technical University, Ankara, Turkey, 1986
  • Education Scholarship from Scientific and Technical Research Council of Turkey (TUBITAK) during B.S. and M.S., 1981-1989
  • Ranked 2nd in the competitions of TUBITAK High School Mathematics, Marmara region, 1980
  • Ranked 3rd in the competitions of TUBITAK High School Physics, Marmara region, 1979

 

PROJECTS & GRANTS

  • Sozer, E. M., “Developing a hybrid composite manufacturing process that will resolve the issues of VARTM, FASTRAC and VIPR processes by technological improvements and process control”, Grant #: MAG-112M400, Scientific and Technical Research Council of Turkey (TÜBİTAK), MAG Career Project, November 2012 – May 2015, 188,700 TL.
  • Sozer, E. M., “Mold Design, Process Control and Enhancement of Part Quality in Carbon Fiber Reinforced Composites Using Resin Transfer Molding (RTM) and Vacuum Infusion (VI) Processes”, Ford Motor Company’s University Research Program for future high volume production of composite components, one of the nineteen awards granted to sixteen different universities, April 2012 – March 2015, $120,000.
  • Sozer, E. M., Teaching Innovation Grant, Koc University Office of Learning and Teaching, 2010.
  • Sozer, E. M., “Automated Manufacture of Composite Materials by Solving the Issues of RTM Process,” Grant #: MAG-104M290, Scientific and Technical Research Council of Turkey (TÜBİTAK), MAG Career Project, April 2005 – January 2009,  99,960 TL.
  • Sozer, E. M., “Control of Resin Transfer Molding (RTM) Composite Manufacturing Process with Mold Filling Simulations,” Grant #: MİSAG‑192 Scientific and Technical Research Council of Turkey (TÜBİTAK), August 2001 – February 2003, 18,100 TL.

 

PATENT

  • Joint Patent: S.N. Kolavennu, A.K. Mathur, S. Parthasarathy, W.F. Graber, H.D. Pham, S. Advani, K. Steiner, R. Don, S. Bickerton, E.M. Sozer, “Resin Transfer Molding,” U.S. Patent number: 6856856, application number: 09549220, publication date: 2/15/2005.

 

CITATIONS (by August 29, 2019)

PDF file
Link to GOOGLE SCHOLAR
Link to SCOPUS
Link to WEB OF SCIENCE
Link to ORCID

Google Scholar

All

Since 2014

Citations

1404

683

h-index

18

14

i10-index

23

16


PUBLICATIONS (by August 29, 2019) 

PDF file
Link to GOOGLE SCHOLAR
Link to SCOPUS
Link to WEB OF SCIENCE
Link to ORCID

 

BOOKS

D2. Advani S.G., Sozer E.M., Process Modeling in Composites Manufacturing, 2nd edition, CRC Press, Taylor & Francis Group, Boca Raton, ISBN: 9781420090826, publication date: July 15, 2010.

D1. Advani S.G., Sozer E.M., Process Modeling in Composites Manufacturing, 1st edition, Marcel Dekker, Inc., New York, Print ISBN: 0-8247-0860-1, E-ISBN: 0824743431, publication date: August 28, 2002.

 

BOOK CHAPTERS

C3. Sozer E.M., Simacek P., Advani S.G., “Chapter 9: Resin Transfer Molding (RTM)”, in “Manufacturing techniques for polymer matrix composites (PMCs)”, pages: 243-309, Editors-in-Chief: S.G. Advani and K.-T. Hsiao, Woodhead Publishing Limited, ISBN-13: 9780857090676, July 2012.

C2. Advani S.G., Sozer E.M., “Process Modeling”, in ASM Handbook, Volume 21, Composites, Volume chairs: D. B. Miracle and S. L. Donaldson, and chairperson: B. T. Astrom (editors), pages: 423-433, Ohio, ASM International, December 2001.

C1. Advani S.G., Sozer E.M., “Chapter 23: Liquid Molding of Thermoset Composites”, Volume 2, pages 807-844, in Comprehensive Composite Materials, Editors-in-Chief A. Kelly and C. Zweben, Elsevier Science, New York, July 2000.

 

JOURNAL ARTICLES

A30. Hancioglu M., Sozer E.M., Advani S.G., “Comparison of in-plane resin transfer molding and vacuum-assisted resin transfer molding ‘effective’ permeabilities based on mold filling experiments and simulations,” Journal of Reinforced Plastics and Composites, DOI: 10.1177/0731684419868015, publication date: 2019/8/8 (2019).

A29. Yalcinkaya M.A., Sozer E.M., Altan M.C., “Effect of external pressure and resin flushing on reduction of process-induced voids and enhancement of laminate quality in heated-VARTM,” Composites Part A: Applied Science and Manufacturing, 121, 353-364, (2019).

A28. May D., et al. (researchers and authors from 19 institutes), “In-plane permeability characterization of engineering textiles based on radial flow experiments: A benchmark exercise,” Composites Part A: Applied Science and Manufacturing, 121, 100-114, (2019).

A27. Sozer E.M., Zeybekoglu Z., Kaya M., “Using mid-semester course evaluation as an assessment tool for improving learning and teaching in higher education,” Assessment and Evaluation in Higher Education, 44(7), 1003-1016, (2019). 

A26. Yalcinkaya M.A., Guloglu G.E., Pishvar M., Amirkhosravi M., Sozer E.M., Altan M.C., “Pressurized infusion (PI): a new and improved liquid composite molding process,” Journal of Manufacturing Science and Engineering, 141, 011007-1, 1-12, DOI: 10.1115/1.4041569, (2019).

A25. Yalcinkaya M.A., Sozer E.M., Altan M.C., “Dynamic pressure control in VARTM: rapid fabrication of laminates with high fiber volume fraction and improved dimensional uniformity,” Polymer Composites, 40(6), 2482-2494, (2019).

A24. Sozer E.M., Zeybekoglu Z., Alayli A., “Examining graduate teaching assistants’ conceptions of and readiness for effective teaching in a non-profit Turkish university,” Innovations in Education and Teaching International, 56(2), 373-384, (2019).

A23. Caglar B., Salvatori D., Sozer E.M., Michaud V., “In-plane permeability distribution mapping of isotropic mats using flow front detection,” Composites Part A: Applied Science and Manufacturing, 113, 275–286, (2018).

A22. Yalcinkaya M.A., Sozer E.M., Altan C., “Fabrication of high quality composite laminates by pressurized and heated-VARTM,” Composites Part A: Applied Science and Manufacturing, 102, 336-346, (2017).

A21. Caglar B., Orgéas L., du Roscoat S.R., Sozer E.M., Michaud V., “Permeability of textile fabrics with spherical inclusions,” Composites Part A: Applied Science and Manufacturing, 99, 1-14, (2017).

A20. Yenilmez B., Caglar B., Sozer E.M., “Viscoelastic modeling of fiber preform compaction in Vacuum Infusion process,” Journal of Composite Materials, 51(30), 4189-4203, (2017).

A19. Yenilmez B., Caglar B., Sozer E.M., “Pressure-controlled compaction characterization of fiber preforms suitable for viscoelastic modeling in the Vacuum Infusion process,” Journal of Composite Materials, 51(9), 1209-1224, (2017).

A18. Yalcinkaya M.A., Caglar B., Sozer E.M., “Effect of permeability characterization at different boundary and flow conditions on Vacuum Infusion process modeling,” Journal of Reinforced Plastics and Composites, 36(7), 491–504, (2017).

A17. Yalcinkaya M.A., Sarioglu A., Sozer E.M., “A novel mold design for continuous permeability measurement of fiber preforms,” Journal of Reinforced Plastics and Composites, 34(11), 915-930, (2015).

A16. Caglar B., Yenilmez B., Sozer E.M., “Modeling of post-filling stage in vacuum infusion using compaction characterization,” Journal of Composite Materials, 49(16), 1947-1960, (2015).

A15. Yalcinkaya M.A., Sozer E.M., “Effect of part thickness variation on the mold filling time in Vacuum Infusion process,” Journal of Reinforced Plastics and Composites, 33(23), 2136-2150, (2014).

A14. Yenilmez B., Sozer E.M., “Compaction of e-glass fabric preforms in the vacuum infusion process: (a) use of characterization database in a model and (b) experiments,” Journal of Composite Materials, 47(16), 1959-1975, (2013).

A13. Yenilmez B., Akyol T., Caglar B., Sozer E.M., “Minimizing thickness variation in the Vacuum Infusion (VI) process,” Advanced Composites Letters, 20(6), 157-168, (2011).

A12. Yenilmez B., Sozer E.M., “Compaction of e-glass fabric preforms in the Vacuum Infusion process, A: characterization experiments,” Composites Part A: Applied Science and Manufacturing, 40(4), 499-510, (2009). 

A11. Yenilmez B., Sozer E.M., “A Grid of dielectric sensors to monitor mold filling and resin cure in Resin Transfer Molding,” Composites Part A: Applied Science and Manufacturing, 40(4), 476-489, (2009).

A10. Yenilmez B., Senan M., Sozer E.M., “Variation of part thickness and compaction pressure in vacuum infusion process,” Composites Science and Technology, 69(11-12), 1710-1719, (2009).

A9. Tuncol G., Danisman M., Kaynar A., Sozer E.M., “Constraints on monitoring resin flow in the Resin Transfer Molding (RTM) process by using thermocouple sensors,” Composites Part A: Applied Science and Manufacturing, 38(5), 1363–1386, (2007).

A8. Danisman M., Tuncol G., Kaynar A., Sozer E.M., “Monitoring of resin flow in the Resin Transfer Molding (RTM) process using point-voltage sensors,” Composites Science and Technology, 67(3-4), 367-379, (2007).

A7. Lawrence J.M., Hsiao K.T., Don R.C., Simacek P., Estrada G., Sozer E.M., Stadtfeld H.C., Advani S.G., “An approach to couple mold design and on-line control to manufacture complex composite parts by resin transfer molding,” Composites Part A: Applied Science and Manufacturing, 33(7), 981-990, (2002).

A6. Sozer, E. M., Bickerton, S., Advani, S. G., “On-line strategic control of liquid composite mould filling process,” Composites Part A: Applied Science and Manufacturing, 31(12), 1383-1394, (2000).

A5. Laval N., Sozer E.M., Advani S.G., “Characterisation of permeability around a 90 degrees corner,” Advanced Composites Letters, 9(1), 17-24, (2000).

A4. Slade J., Sozer E.M., Advani S.G., “Fluid impregnation of deformed preforms,” Journal of Reinforced Plastics and Composites, 19(7), 552-568, (2000).

A3. Bickerton, S., Sozer, E. M., Simacek, P., Advani, S. G., “Fabric structure and mold curvature effects on preform permeability and mold filling in the RTM process. Part II. Predictions and comparisons with experiments,” Composites Part A: Applied Science and Manufacturing, 31(5) 439-458, (2000). 

A2. Bickerton, S., Sozer, E. M., Graham, P., Advani, S. G., “Fabric structure and mold curvature effects on preform permeability and mold filling in the RTM process. Part I. Experiments,” Composites Part A: Applied Science and Manufacturing, 31(5), 423-438, (2000).

A1. Sozer, E.M., Greenberg M.D., “The time-dependent free-surface flow induced by a submerged line source or sink,” Journal of Fluid Mechanics, 284, 225-237, (1995).

 

CONFERENCE PROCEEDINGS (INTERNATIONAL)

B27. Yalcinkaya M.A., Sozer E.M., and Altan M.C., “Recent Advances in Liquid Composite Molding Processes,” 35th International Conference of the Polymer Processing Society (PPS-35), Izmir (Turkey), May 26-30, 2019.

B26. Caglar B., Salvatori D., Sozer E.M., Michaud V., “In-plane permeability characterization using an inverse method based on flow front visualization,” 18th European Conference on Composite Materials (ECCM), Athens (Greece), June 24-28, 2018.

B25. Caglar B., Salvatori D., Sozer E.M., Michaud V., “A combined experimental-numerical approach for efficient permeability measurement,” 5th International Polymeric Composites (IPC) Symposium and Workshops, Izmir (Turkey), November 2-4, 2017.

B24. Caglar B., Salvatori D., Sozer E.M., Michaud V., “A tool for minimization of race-tracking effects in permeability measurements,” 13th International Conference on Flow Processes in Composite Materials (FPCM), Kyoto, Japan, July 6-9, 2016.

B23. Caglar B., Michaud V., Sozer E.M., “Experimental investigation of textile permeability in the presence of spherical inclusions,” 17th European Conference on Composite Materials (ECCM), pages 5628-5635, Munich, Germany, June 26-30, 2016.

B22. Yalcinkaya M.A., Caglar B., Sozer E.M., “Effect of using different boundary and flow conditions on permeability measurement experimental results and appropriate mold filling modeling of VARTM,” 4th International Polymeric Composites (IPC 2015) Symposium-Exhibition and Workshop, Cesme, Izmir, Turkey, May 7-9, 2015.

B21. Sozer E.M., Zeybekoglu Z., Cagan F., “The use of information technology among Turkish university students,” 9th International Technology, Education and Development Conference (INTED 2015), Madrid, Spain, March 2-4, 2015.

B20. Sozer E.M., Zeybekoglu Z.C., Alayli A., “The effect of training program on graduate teaching assistants’ self‐efficacy beliefs for teaching,” Educational Development in a Changing World, Stockholm (ICED 2014), Sweden, June 16-18, 2014.

B19. Sozer E.M., Yenilmez B., “Sensor systems used in the resin transfer molding and vacuum infusion processes to monitor mold filling and resin cure,” 14th International Conference on Machine Design and Production, Guzelyurt, Turkish Republic of Northern Cyprus, June 29 – July 02, 2010.

B18. Yenilmez B., Sozer E.M., “Minimizing thickness variation in Vacuum Infusion,” ETDCM9- 9th Seminar on Experimental Techniques and Design in Composite Materials, DTG University of Padova, Vicenza, Italy, 30 September – 2 October 2009.

B17. Senan M., Yenilmez B., Sozer E.M., “Monitoring of part dimensions and fiber content in Vacuum Assisted Resin Transfer Molding (VARTM) process,” ETDCM8- 8th Seminar on Experimental Techniques and Design in Composite Materials, Castiadas, Costa Rei, Sardinia, Italy, 3-6 October 2007.

B16. Guclu G.T., Bayrak T., Sozer E.M., “Mold design in Resin Transfer Molding (RTM) process using point-voltage sensors,” ETDCM8- 8th Seminar on Experimental Techniques and Design in Composite Materials, Castiadas, Costa Rei, Sardinia, Italy, 3-6 October 2007.

B15. Sozer, E.M., Tuncol G., Kaynar, A., “Monitoring Mold Filling and Resin Cure in RTM,” FPCM 7 (Flow Processes in Composite Materials) International Conference, pp 297-303, Newark, Delaware, USA, July 5-7, 2004.

B14. Sozer, E.M., “Mold Design for Resin Transfer Molding Process,” 3rd International Conference and Exhibition on Design and Production of Dies and Molds, pp 91-100, Bursa, Turkey, June 17-19, 2004.

B13. Sozer, E. M., “Effect of Preform Non-uniformity on Mold Filling in RTM Process,” Society for the Advancement of the Material and Process Engineering (SAMPE), pp 176-189, Seattle, USA, November 5-7, 2001.

B12. Stadtfeld, H., Sozer, E.M., Steiner K.V., Advani, S.G., Kolavennu S. Parthasarathy S., “Approach towards an automated design environment for the resin transfer molding process,” Society for the Advancement of the Material and Process Engineering (SAMPE), pp 1576-1583, Long Beach, California, USA, May 21-25, 2000.

B11. Sozer, E.M., Bickerton, S., Advani, S.G., “Use of sensors and simulations for strategic control of liquid composite mold filling process,” CMA/SME, Composites Manufacturing and Tooling 2000 Conference and Tabletop Exhibits, pp 167-190, Newport Beach, California, USA, February 23-25, 2000.

B10. Sozer, E.M., Bickerton, B., Advani, S.G., “Modeling and Control of the Liquid Composite Molding,” Proceedings of the Fifth International Conference on Flow Processes in Composite Materials (FPCM 5), pp 109-124, Plymouth, U.K., July 12-14, 1999.

B9. Sozer, E.M., Chen, B., Graham, P.J., Chou, T.-W., Advani, S.G., “Characterization and Prediction of Compaction Force and Preform Permeability of Woven Fabrics During the Resin Transfer Molding Process,” Proceedings of the Fifth International Conference on Flow Processes in Composite Materials (FPCM 5), pp 25-36, Plymouth, U.K., July 12-14, 1999.

B8. Advani, S.G., Sozer, E.M., Bickerton, S., Stadtfeld, H.C., and Steiner, K. V., “Use of sensors and simulations to move towards automation of the resin transfer molding process,” Proceedings of the Twelfth International Conference on Composite Materials (ICCM 12), Paris, France, July 5-9, 1999.

B7. Stadtfeld H.C., Bickerton, S., Sozer, E.M., Indermaur, M., Steiner, K.V., Advani, S.G., “On-line control for Resin Transfer Molding Process,” Conference Proceeding of the Polymer Processing Society 15th Annual Meeting, Netherlands, June 1-4, 1999.

B6. Sozer, E.M., Greenberg, M.D., “Nonlinear strip theory calculation of wave drag and lift on a submerged slender body,” the 13th ASCE MED Conference, Baltimore June 1999.

B5. Sozer, E.M., Gokce, A., Advani, S.G., “Estimating permeability of compacted fabrics in RTM process,” Proceedings of the Annual Meeting of the Society of Plastics Engineers: ANTEC, pp 2675-2681, New York, NY, May 2-6, 1999.

B4. Sozer, E.M., Simacek, P., Advani, S.G., “Draping and filling of long axisymmetric molds in RTM process,” Proceedings of the Eighth Japan-U.S. Conference on Composite Materials, pp 73-84, Baltimore, MD, September 24-25, 1998.

B3. Simacek, P., Sozer, E.M., Advani, S.G., “Numerical simulations of mold filling for design and control of RTM process,” Proceedings of the Annual Meeting of the Society of Plastics Engineers: ANTEC, pp 2327-2335, Atlanta, GA, April 27-30, 1998.

B2. Sozer, E.M., Greenberg, M.D., “A vortex sheet approach to the nonlinear flow induced by a line source or  sink,” Boundary Elements XV (ed Brebbia, C.A. and Rencis, J.J.), Proceedings of the Fifteenth International Conference on BEM, Computational Mechanics Publications, Elsevier, Worcester, USA,  pages: 207-220, August 10-13, 1993.

B1. Caliskan, M. Sozer, E.M., “Analysis of structurally coupled interior acoustic fields by acoustoelasticity method,” International Congress on Recent Developments in Air and Structure Borne Sound and Vibration, Auburn, USA, March 6-8, 1990.