İsmail Lazoğlu

Professor of Mechanical Engineering

Director of Manufacturing and Automation Center (MARC)

E-mail: ilazoglu@ku.edu.tr

Office Phone: +90 (212) 338 1587

MARC Phone: +90 (212) 338 1771

Manufacturing and Automation Center (MARC) on Google Map

 

 

Education:

     Ph.D. Georgia Institute of Technology, 1997

     M.S. Georgia Institute of Technology, 1992

     B.S. (with high honor) Istanbul Technical University, 1989

Work:

     Koc University, Professor, since 12/2012-Present

     Koc University, Associate Professor, 12/2007-12/2012

     Koc University, Assistant Professor, 9/2000-12/2007

     Art et Métiers ParisTech, Visiting Professor, 6-7/2017

     University of British Columbia, Visiting Professor, 9/2014-8/2015

     RWTH Aachen-Werkzeugmaschinenlabor (WZL), Visiting Professor, 6-8/2002

     University of British Columbia, Post-Doctoral Fellow, 3/1999-7/2000

University of Illinois at Urbana-Champaign, Post-Doctoral Research Associate, 3/97-3/99

     Georgia Institute of Technology, Research and Teaching Assistant, 1992-1997

Editorial Work:

Honors and Awards:

      • Health Sciences of the Year Award from TÜMBİFED for the development of the first implantable heart pump and support system (Istanbul Heart VAD) of Turkey, 2022
      • Koç University Outstanding Faculty Award, 2020.
      • Best Reviewer Award, Journal of Material Processing Technology, 2020.
      • The first implantable artificial heart pump of Turkey (Istanbul Heart Ventricular Assist Device and Support System, “iHeart VAD”) received the Best Medical Industry R&D and Innovation Award of 2018 from Doktorclub-Medical Awards of Turkey.
      • Turkey’s first indigenous artificial heart pump (LVAD) and cardiac support system was successfully implemented and tested on animals on November 17, 2017.
      • The Third Best Presentation Award in the 14th International Congress of Update in Cardiology and Cardiovascular Surgery, April 2018.
      • Elected as the Fellow of CIRP (College International pour la Recherche en Productique – The International Academy for Production Engineering),8/2017.
      • Head of the Technology Advisory Board of the Turkish Aerospace Industries, Inc., 2017-2018.
      • The Second Best Novel Research Award in the 14th Congress of the Turkish Society of Cardiovascular Surgery for the presentation titled as “In-vitro Analysis of the Hemolysis on the Newly Developed Left Ventricular Assist Device (LVAD) for the Last-Stage Heart Failures” by C.Ozturk, I.B. Aka, I. Lazoglu and D. S. Kucukaksu in 2016.
      • Gold Medal Award for the “Adjustable Bone Plate Patent” from the World Intellectual Property Organization, 2016.
      • The Best Academic Patent Award for the “Adjustable Bone Plate Patent” from the International Federation of Inventor Association (IFIA), 2016.
      • Technology Advisory Board Member of the Turkish Aerospace Industries (TAI), Inc., 2015-present.
      • Koc University College of Engineering Outstanding Faculty Award, 2014.
      • TUBITAK (The Scientific and Technological Research Council of Turkey) International Research Fellowship, 2014-2015.
      • With the Implantable Miniature Heart Pump Project, Received the Second Best Academic Research Project Award from the Machinery and Accessories Exporters Union, 2012.
      • Recipient of The Machine Tool Technologies Research Foundation (MTTRF) Award, 2009-2012.
      • The research titled as “Development of the First Turkish Miniature and Implantable Centrifugal Heart Pump Support System: Heart Turcica-2” received “The Second Best Oral Presentation Award” from the Turkish Society of Cardiovascular Surgery in 2006
      • Young Scientist Award (“Teşvik Ödülü“) from the Scientific and Technical Research Council of Turkey (TÜBİTAK) in 2005.
      • The co-author for the paper in the Japan Society of Mechanical Engineers – International  Conference on Leading Edge Manufacturing 2005, “The Outstanding Young Researcher Award” given to his graduate student Huseyin Erdim.
      • Werner von Siemens Excellence Award for Science and Innovation in 2004.
      • The Scientific and Technical Research Council of Turkey (TÜBİTAK)’s Career Development Award for Scientists and Engineers in 2004.
      • Awarded by the Research Scholarship of the Deutscher  Akademischer Austauschdienst (DAAD) for Foreign Scientists in 2002.
      • Selected as the Outstanding Reviewer by the American Society of Mechanical Engineers, Journal of Manufacturing Science and Engineering in 2001.
      • Awarded by the scholarship from the Ministry of Education to continue Masters and Ph.D. studies in overseas countries by ranking 1st in the nationwide exam given to the mechanical engineers in 1989.
      • Ranked as the second of Class’89 in the Faculty of Mechanical Engineering at the Istanbul Technical University.
      • Executive Board Member of The Technology and Innovation Funding Program Directorate (TEYDEB) – Transportation, Defense, Energy and Textile Technologies Group of the Scientific and Technological Research Council of Turkey (TUBITAK),  4/ 2012-4/2014.
      • Advisory Board Member of The Scientific and Technological Research Council of Turkey (TUBITAK) -Technology and Innovation Funding Program Directorate (TEYDEB) – Machine and Manufacturing Division (MAKITEG). 2010-2012. 
      • Member of the European Society for Artificial Organs
  • Recent Projects:
      • “Machining of Flexible Recycled Composite Components for Electrical Vehicles and Aeronautics“, M-ERA.NET, 2024-2026
      • “AI Assisted Injection Mold Design”, TÜBİTAK, Arcelik, 2024-2026
      • “Modeling and Development of Motion Control System of Ground Station Antenna”, PROFEN Defense, 2022-2023.
      • “Development of 3D Metal Printers”,TÜBİTAK, 2022-2025.
      • “Smart Manufacturing and Digital Twin”, Ford Otosan, 2021-2023.
      • “High Performance Drying System”, Arçelik, 2021-2023.
      • “Smart Conformal Cooling Systems“, Arçelik A.Ş, 2021-2024.
      • “Novel Hip Implant System“, TÜBİTAK, İYTE, 2020-2023.
      • “Artificial Heart Pump System“, TÜBİTAK, 2020-2023.
      • “Artificial Intelligence in Automotive Part Design”, TÜBITAK and TOFAŞ, 2020-2027.
      • “Compressor Valf System Development”, Arçelik, 2021-2023.
      • “Novel Sensor Development for Manufacturing”, Ford Otosan, 2020-2021.
      • “Advanced Research for Unmanned Air Vehicles”, Baykar Savunma, 2020-2021. 
      • “Multi-functional Medical Ventilator”, Başarı Teknolojik Sistemler San. ve Tic. A.Ş., 2020-2021.
      • “Home Robotics”, Arçelik A.Ş, 2020-2021.
      • “Artificial Intelligence in 3D Printing“, Arçelik A.Ş, 2020-2022
      • “Industrial IoT for Advanced Manufacturing and Automation”, Siemens, 2020-.
      • “Advanced Manufacturing and Automation”,  Arçelik A.Ş and TÜBITAK, 2019-2026.
      • “Ultra-High Efficient Compressor Development”, Arçelik A.Ş  and TÜBİTAK, 2019-2026.
      • “Robotic Additive Manufacturing and Automation”, Mitsubishi Electric, 2018-.
      • “Development of a New Active and Adaptive Vibration Control System”, Arçelik A.Ş and TÜBİTAK, 2016-2018.
      • “Manufacturing of Gamma-Titanium Aluminide Intermetalic Components for Aeronautic Applications”, Karcan Cutting Tools, 2015-2018.
      • “Development of Novel Cutting Tools for Machining of Aerospace Materials”,  Alp Aviation, 2015-2017.
      • “Laser Additive Manufacturing of Nickel Super Alloys for Aerospace Applications”, Turkish Undersecretariat for Defence Industries, TEI-TUSAŞ Engine Industries, Inc.,  2014-2017.
      • “Development of a Novel Linear Compressor System”, Arçelik A.Ş, 2015-2016
      • “Incremental Forming”,  TOFAŞ Türk Otomobil Fabrikası A.Ş,  2015-2017.
      • “Development of a Novel High Precision Drug Preparation and Monitoring System for Medical Applications”, TIM Inc., 2014-2016.
      • “Development of a High Performance Linear Compressor System”,  Arçelik A.Ş and the Ministry of Science, Technology and Industry, 2012-2014.
      • “Direct Precision Manufacturing for Titanium (Ti-6Al-4V) and other High Temperature Materials (Inconel718)“, Lockheed Martin Corporation, Space System Company, 2012 – 2013.
      • “Investigation on Mechanics and Dynamics of Micromachining and Process Optimization for High Performance”, The Scientific and Technological Research Council of Turkey, 2011-2013.
      • “Mechanics, Dynamics and Optimization of High Precision Five Axis Machining“  Mori Seiki Machine Tool Company and DP Technology Corp. via Machine Tool Technologies Research Foundation (MTTRF), 2011-2012.
      • “High Performance Machining of Aerospace Aluminum Alloys”,  Turkish Aerospace Industry (TAI), 2011-2012.
      • “Development of Novel Cervical Implants”, American Hospital of Istanbul. 2010-2012.
      • “Machining Advanced Engineering Materials”, General Electric, 2011-2012.
      • “5-Axes High Precision CNC Machining Process Modeling and Optimization”, Mori Seiki Machine Too Tool Company and Esprit CAD/CAM Software DP Technology Corp. via MTTRF, 2009-2011.
      • “Development of Pilot Battery Recycling System for Turkey”, TÜBİTAK, Istanbul Metropolitan Municipality, Ministry of Environment.  In collaboration with TÜBİTAK Marmara Research Center, 2009-2012.
      • “Design and Production of an Industrial, High Precision, 3D Laser Machining Machine”,  Lazermikron Ltd. and the Ministry of Industry and Trade  2009-2012.
      • “Automation of Computer Aided Design Process for New Automotive Doors“, TOFAŞ Türk Otomobil Fabrikası A.Ş. 2008-2010.
      • “Advanced Computer Aided Engineering Analysis of a Novel Dynamic Human Spinal Implant”, VKV American Hospital. 2009-2010.
      • “Modeling Machining of Advanced Aerospace Alloys”,  General Electric. 2009.
      • “Modeling Milling of Advanced Engineering Material Ti6Al4V”, General Electric. 2009.
      • “Modeling Turning of Advanced Engineering Materials: Ti6Al4V and Inconel 718″, General Electric. 2009.
      • “Mechanics and Thermal Analysis of Advanced Engineering Materials : Ti6Al4V and Inconel 718”, General Electric. 2008.
      • “Computer Aided Design and Optimization of a Novel Dynamic Human Spinal Implant”, VKV American Hospital, Medikon A.Ş. 2008.
      • “Analysis and Optimization of New Automotive Engine Production Process“, Renault. 2008.
      • “Design, Analysis and Prototype Production of the First Implantable Miniature Heart Pump as the Left Ventricular Assist Device in Turkey“, The Scientific and Technical Research Council of Turkey (TÜBİTAK). Project No: 106M309. 1/1/2007-1/1/2010)
      • “An Investigation on the Impact Fatigue Characteristics of Compressor Valve Leaves“, Ministry of Industry and Trade, and Arçelik A.Ş. Project No: 2.STZ.2006- 1 1/1/2007-1/1/2010)
      • “Development of a High Precision Parallel Kinematics Robot for Micro Machining“, TÜBİTAK Project No: 105M213. 1/11/2006 -1/11/2009)
      • “Rapid Prototyping, Modeling and Optimization of Computer Controlled High Speed Production Processes”,The Young Scientists Career Development Program of the Scientific and Technical Research Council of Turkey (TUBITAK Project No: 104M287).
      • “Residual Stress Analysis in Jet Engine Manufacturing“, In collaboration with Pratt & Whitney-Canada. 2006-2010.
      •  “Feedrate Scheduling for 3D Complex Free-Form Surface Machining“, In Collaboration with ModuleWorks GmbH from Germany. 2005- 2010.
      • “Thermal Analysis of CNC Machining Processes with Infra-red Camera“, Funded by The Scientific and Technical Research Council of Turkey (TÜBİTAK Project No: 101M043. 2003-2006).
      •  “Thermal, Mechanical and Dynamic Analysis of Hard Turning Process“, In collaborations with Technical University of Aachen, Germany, Renault-Nissan Company from France and Seco Tools AB from Sweden.-  Supported partly by the Research Scholarship Program of the Deutscher  Akademischer Austauschdienst (DAAD) for Foreign Scientists. 2002-2005.
      •  “Investigation of Tapping Process“, Makina Takim Endustrisi A.S.  2003-2005.
      • “Modeling Mechanics and Dynamics of Drilling Process“,  Arcelik A.S. 2003-2006.

Book:

Üretim Otomasyonu – Translated by İsmail Lazoğlu and Erhan Budak from  “Manufacturing Automation” by Yusuf Altıntaş.  ISBN: 978-605-9389-87-7, Koç University Press, December 2017

Book Chapters:

    1. Lazoglu,I., Layegh, S.E.K., Mamedov, A., Erdim, H., Chapter Title: “Process Optimization via Feedrate Scheduling in Milling”, Editors: In Laperrière, Luc; Reinhart, Gunther , Book Title: “CIRP Encyclopedia of Production Engineering”, Editors: In Laperrière, Luc; Reinhart, Gunther, Berlin Heidelberg, Springer, DOI: 0.1007/978-3-642-35950-7_16762-3, 2018.
    2. Lazoglu, I., Layegh, E., Mamedov, A., Chapter Title: “Mechanics of Titanium Machining”,  Book Title: “Machining of Titanium Alloys”, edited by Prof. J.P. Davim, Springer Heidelberg New York Dordrecht London, ISSN:2195-0911, ISBN:978-3-662-43901-2, (DOI:10.1007/978-3-662-43902-9),  pp.57-78, May 2014.
    3. Boz, Y., Layegh, E., Erdim, H., Lazoglu, I., Chapter Title: “High Performance Five Axis Milling of Complex Sculptured Surfaces”, Book Title: “Machining of Complex Sculptured Surfaces”, edited by Prof. J.P. Davim, (DOI: 10.1007/978-1-4471-2356-9_3), Springer-Verlag London Limited, pp. 67-125,  2012.
    4. Zafarparandeh, I., Lazoglu, I., Chapter Title: “Application of the Finite Element Method in Spinal Implant Design and Manufacture”, Book Title: “The Design and Manufacture of Medical Devices”, ISBN: 978-1907568725, Woodhead Publishing, Cambridge, UK, 2012.
    5. Akgun, E., Lazoglu, I., Ozer, A. F., Kener, T., Chapter Title: “Design and Manufacture of a Novel Dynamic Spinal Implant”, Book Title: “The Design and Manufacture of Medical Devices”, ISBN: 978-1907568725, Woodhead Publishing, Cambridge, UK, 2012.
    6. Erbulut, D., Lazoglu, I., Chapter 8: “Specialty Materials for Total Artificial Hearts (TAH) and for Ventricular Assist Devices (VAD)”, Book Title: Biomaterials for Artificial Organs , edited by Prof. Michael Lysaght and Prof. Thomas Webster, ISBN: 978-1845696535, Woodhead Publishing, Cambridge, UK, , 2011.
    7. Lazoglu, I., Akgun, E., Chapter 7: “Rigid and Dynamic Spinal System Modeling by Finite Elements Methods” (in Turkish), Book Title: Intervertebral Disc Disease and Dynamic Stabilization of Lumbar Spine, Edited by Prof. A. F. Ozer,  ISBN:978-9756523292, V.K.V. American Hospital Publications, pp.72-84, 2011.
    8. Lazoglu, I., Erbulut, D., Chapter 8: “Finite Element Modeling of Lumbar Implants and their Contributions to Spine BioMechanics” (in Turkish), Book Title: Intervertebral Disc Disease and Dynamic Stabilization of Lumbar Spine, Edited by Prof. A. F. Ozer,  ISBN:978-9756523292, V.K.V. American Hospital  Publications, pp.86-93, 2011.

Journal Articles:

    1. Chehrehzad, M., Kecibas, G., Besirova, C., Uresin, U., Irican, M., Lazoglu, I., “Tool wear prediction through AI-assisted digital shadow using industrial edge device“, Journal of Manufacturing Processes. Accepted, 2024.
    2. Nejatpour, M.,  Saleh, M.K.A.,  Ulasyar, A.,  Unal, U., Lazoglu, I.,  “Bidisperse Magnetorheological Fluids with Strong Magnetorheological Response, Long-term Stability and Excellent In-use Performance“,
      Smart Materials and Structures. DOI:  10.1088/1361-665X/ad1e8a, 2024.
    3. Armanfar, A., Taşmektepligil,AA , Ustundag, E.,  Lazoglu, I., Gunpinar,E., “A mechanical property prediction system for G-Lattices via machine learning“,  Engineering Optimization. DOI: 10.1080/0305215X.2023.2295353,  1-19, 2024.
    4. Aslan, L.,  Subasi, O.,  Gedik, CC,  Birsel, O.,  Lazoglu, I.,  Demirhan, M., Eren, I.,  “In Silico Analysis of Rib Force Distribution in Post Scapulothoracic Arthrodesis Model“,  Journal of Orthopaedic Research, DOI: 10.1002/jor.25771, 2023.
    5. Konuskan, Y.,  Yılmaz, A.H.,  Tosun, B., Lazoglu, I., “Machine learning-aided cooling profile prediction in plastic injection molding“, The International Journal of Advanced Manufacturing Technology. DOI: 10.1007/s00170-023-12879-9, Vol. 130, pp. 2957-2968, 2024.
    6. Arshad, M., Mehmood, K., Lazoglu, I., “Development of a non-invasive ventilator for emergency and beyond“, Computers in Biology and Medicine. DOI: j.compbiomed.2023.107670.   107670, 2023. 
    7. Pashak, P., Shahzad, A., Abdulhamid, F., Lazoglu, I., “Experimental and numerical analysis of two different bottom pumps of a hermetic reciprocating compressor at low speeds“, International Journal of Refrigeration. DOI:10.1016/j.ijrefrig.2023.10.008. Vol. 156, pp. 198-206, 2023.
    8. Subaşı, Ö., Aslan, L., Oral, A., Demirhan M., Seyahi A.,  Lazoglu, I., “Intraoperative Fluoroscopic Safety Assessment of Femoral Head Implants with 3D Risk Parameters to Minimize Cut-Out“, Acta Orthopaedica et Traumatologica Turcica. DOI: 10.5152/j.aott.2023.22175.  Vol. 57:3, pp. 134-140, 2023. 
    9. Mehmood, K.,  Lazoglu,I., Küçükaksu, D.S., “Acausal modelling of advanced-stage heart failure and the Istanbul Heart ventricular assist device support with patient Data“, Cardiovascular Engineering and Technology. DOI: 10.1007/s13239-023-00683-1, 2023. 
    10. Torabnia,S., Mihcin, S., Lazoglu, I., “Design and manufacturing of a hip joint motion simulator with a novel modular design approach“, International Journal on Interactive Design and Manufacturing (IJIDeM). DOI: 10.1007/s12008-023-01506-2,  2023.
    11. Arshad, M., Guven, E., Karahasan, B., Lazoglu, I., “A novel real-time wireless sensor integration for enhancing positive pressure system operation in single limb passive vented circuit”, Biomedical Signal Processing and Control. DOI: 10.1016/j.bspc.2023.10499. Vol. 85, 104994, 2023. 
    12. Subasi, O., Karaismailoglu, B.,  Ashkani-Esfahani, S., Lazoglu, I.,“Investigation of lattice infill parameters for additively manufactured bone fracture plates to reduce stress shielding“, Computers in Biology and Medicine. DOI:10.1016/j.compbiomed.2023.107062,  Vol. 161, 107062, 2023.
    13. Mehmood, K., Arshad, M., Lazoglu, I.,  Küçükaksu, D.S., Bakuy, V.,“In silico hemodynamic ramp testing of ventricular assist device implanted patients using acausal cardiovascular VAD modeling“, Artificial Organs. DOI: 10.1111/aor.14597, 2023.
    14. Arman S., Lazoglu, I.,“A comprehensive review of injection mold cooling by using conformal cooling channels and thermally enhanced molds“, The International Journal of Advanced Manufacturing Technology. DOI: 10.1007/s00170-023-11593-w, Vol. 127, pp. 2035–2106, 2023.
    15. Oral, A., Subasi, O., Sahin, C., Haque, U.U., Lazoglu, I., “Effect of Starting Position of Crankshaft on Transient Body Vibrations of Reciprocating Compressor“, International Journal of Refrigeration. DOI: 10.1016/j.ijrefrig.2022.12.028. Vol. 149, pp. 136-145, 2023.
    16. Shahzad, A., Haque, UU,  Lazoglu, I.,  “Effect of the micro-textured piston on the performance of a hermetic reciprocating compressor“, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. DIO:/10.1177/13506501221141520, pp.1107–1118, 2023. 
    17. Aslan, L., Subasi, O.,  Mizikoglu, D.,  Birsel, O.,  Tanrikulu, S., Bas, A., Arshad, M., Lazoglu, I., Seyahi, A., “A new checklist surgical hand scrub to replace time-based methods – A pixel intensity analysis”,  The Surgeon. DOI: 10.1016/j.surge.2023.04.002. Accepted, in press, 2023. 
    18. Akhtar, W., Lazoglu, I., “A novel hybrid model for prediction of distortion in milling“, CIRP Annals.DOI: 10.1016/j.cirp.2023.04.052, Vol. 72:1, pp.73-76, 2023.
    19. Pashak, P., Karabay, A. Y.,  Sahin, C., Malik, A. N.,  Lazoglu, I., “Comparison of constant and variable discharge flow and force coefficients for reciprocating compressor“, International Journal of Refrigeration. DOI: 10.1016/j.ijrefrig.2023.02.019.  Vol. 151, pp.370-384, 2023.
    20. Adil, S., Lazoglu, I., “A review on additive manufacturing of carbon fiber reinforced polymers: Current methods, materials, mechanical properties, applications and challenges“, Journal of Applied Polymer Science.  DOI:10.1002/app.53476, Vol. 140:7, 2/2023.
    21. Oral, A., Subasi, O., Ozturk, C.,  Lazoglu, I., Subay, Ş.A., “A novel approach to tube design via von Mises probability distribution“, Engineering Optimization, DOI:10.1080/0305215X.2022.2152808, 2022.
    22. Oral, A., Subasi, O.,  Korkmaz, C., Lazoglu, I., “A novel transient vibration and noise reducer (TVR) for vibratory machines“, Applied Acoustics, 10.1016/j.apacoust.2022.109139,  Vol. 201, pp. 109139, 2022.
    23. Shahzad, A., Khan, S.A.,  Paksoy, A., Balcı-Çağıran, Ö., “Negative additive manufacturing of Al2O3-Al cermet material by fused deposition and Direct Ink Writing“, Materials Today Communications, DOI:10.1016/j.mtcomm.2022.104739, Vol. 33, 104739, 2022.
    24. Shahzad, A., Pashak, P., Lazoglu, I., “A novel unibody axial flow pump for the lubrication of inverter type hermetic reciprocating compressors“, International Journal of Refrigeration. DOI: 10.1016/j.ijrefrig.2022.04.019, Vol. 140, pp. 1-8, 2022.
    25. Manav, A.C., Lazoglu, I., “A novel cascade path planning algorithm for autonomous truck-trailer parking“, IEEE Transactions on Intelligent Transportation Systems, DOI: 10.1109/TITS.2021.3062701, . Vol. 23:7, pp.6821-6835, 2022. 
    26. Bijanzad, A.,  Abdulwahab, M., Lazoglu, I.,  Ensarioglu, C., Cakir, M.C., “Effect of polyurea coating on the ductility of Aluminum Foam“, Materials Today Communications. DOI:10.1016/j.mtcomm.2022.103334, 103334, 2022.
    27. Izri, Z., Bijanzad, A., Torabnia, S., Lazoglu, I., “In silico evaluation of lattice designs for additively manufactured total hip implants“, Computers in Biology and Medicine. DOI: 10.1016/j.compbiomed.2022.105353, 105353, 2022.
    28. Akhtar, W., Lazoglu, I., Liang, S.Y., “Prediction and control of residual stress based distortions in machining of aerospace parts: A review“, Journal of Manufacturing Processes. DOI:10.1016/j.jmapro.2022.02.005, Vol.76, pp.106-122, 2022.
    29. Yigit, I.E., Khan, S.A., Lazoglu, I., “Robotic additive turning with a novel cylindrical slicing method”, International Journal of Advanced Manufacturing Technology. DOI:10.1007/s00170-021-08567-1, Vol. 119, pp. 7641–7651, 2022.
    30. Cavdar, S., Sürücü, S., Özkan, M., Köse, B., Malik, A.N., Aydoğmuş, E., Tanış, Ö., Lazoglu, I., “Comparison of the morphological and mechanical features of human cranial dura and other graft materials used for duraplasty“, World Neurosurgery. DOI:10.1016/j.wneu.2021.12.029, Vol. 159, pp. e199-e207  2022. 
    31. Ulasyar, A., Saleh, M.K.A, Lazoglu, I., Aydoğdu, Y.E., “A new adaptive vibration control of magnetorheological damper system and its application to washing machine“, Structural Control and Health Monitoring, DOI: 10.1002/stc.2877. Vol.29, Issue 2,e2877, 2022.
    32. Gulzar A., Yıldız E., Kaleli H.N., Nazeer M.A., Zibandeh N.,, Malik A.N., Taş A.Y.,   Lazoglu I., Şahin A., Kizilel S., “Ruthenium-induced Corneal Collagen Crosslinking under Visible Light“, Acta Biomaterialia. DOI:10.2139/ssrn.4040744, 147, pp. 198-208,  2022. 
    33. Kundakcıoğlu, E., Lazoglu, I., Poyraz, Ö., Yasa, E., “Modeling of residual stress and distortion in direct metal laser sintering process: A fast prediction approach“, Production Engineering. DOI:10.1007/s11740-022-01135-w, Vol. 16, pp. 769-783, 2022.
    34. Akhtar, W., Lazoglu, I., “A novel analytical algorithm for prediction of workpiece temperature in end milling“, CIRP Annals – Manufacturing Technology, CIRP Annals – Manufacturing Technology.  DOI:10.1016/j.cirp.2022.03.039, Vol. 71:1, pp.57-60, 2022. 
    35. Aydemir, D.,   Malik, A.N.,  Kulac, I.,  Lazoglu, I.,  Ulusu, N., “Impact of the ALS disease on the biomechanical properties and oxidative stress metabolism of the lung tissue correlated with the human mutant SOD1G93A protein accumulation”, Frontiers in Bioengineering and Biotechnology, DOI:10.3389/fbioe.2022.810243, 10:810243, 2022.
    36. Abdulwahab, M., Bijanzad, A., Khan, S.A., Lazoglu,I., “Effects of polyurea coating on the elastoplastic behavior of additively manufactured PLA specimens“, Progress in Additive Manufacturing. DOI:10.1007/s40964-021-00242-x, 2022.
    37. Subasi, O., Aslan, L., Demirhan, M., Seyahi, A., Lazoglu, I., “A novel lower bound for tip-apex distance“,European Journal of Trauma and Emergency Surgery. DOI: 10.10.1007/s00068-020-01514-x. Vol.48, pp.1787-1798, 2022. 
    38. Shahzad, A., Lazoglu, I., “Direct ink writing (DIW) of structural and functional ceramics: Recent achievements and future challenges“, Composites Part B: Engineering, DOI:10.1016/j.compositesb.2021.109249, 109249, 2021.
    39. Subasi, O., Oral, A., Noyan, S., Tuncozgur, O., Lazoglu, I.,“In silico analysis of modular bone plates“, Journal of the Mechanical Behavior of Biomedical Materials, DOI:10.1016/j.jmbbm.2021.104847, Vol. 124, 104842, 2021.
    40. Manav, C., Aydemir, E., Lazoglu, I., “Adaptive path-following control for autonomous semi-trailer docking“, IEEE Transactions on Vehicular Technology. DOI: 10.1109/TVT.2021.3125131. Vol 71, pp. 69-85, 2022. 
    41. Malik, A.N., Khan, S.A., Lazoglu, I., “A novel demand-actuated defrost approach based on the real-time thickness of frost for the energy conservation of a refrigerator“, International Journal of Refrigeration, DOI: 10.1016/j.ijrefrig.2021.07.032, Vol. 131, pp.168-177, 2021.
    42. Subasi, O., Oral, A., Torabnia, S., Erdogan, D., Erdogan, M., Lazoglu, I., “In silico analysis of elastomer-coated cerclage for reducing sternal cut-through in high-risk patients“, ASME Journal of Biomechanical Engineering, DOI: 10.1115/1.4050912, Paper No: BIO-21-1078, April 2021. 
    43. Aslan, L., Subasi, O., Demirhan, M., Seyahi, A., Lazoglu, I., “The safety and accuracy of the fluoroscopic imaging during proximal femoral fixation: A computerized 3D reappraisal of the joint penetration risk“, Injury, DOI:10.1016/j.injury.2020.11.064, Vol. 52 (6), pp. 1450-1455, 2021.
    44. Mustafa, S.S.,  Lazoglu, I., “A new model and direct slicer for lattice structures“, Structural and Multidisciplinary Optimization, Springer Nature. DOI: 10.1007/s00158-020-02796-w.Vol. 63, pp. 2211–2230, 2021. 
    45. Saleh, M.K.A., Ulasyar, A., Lazoglu, I., “Active damping of chatter in the boring process via variable gain sliding mode control of a Magnetorheological Damper“, CIRP Annals,DOI:10.1016/j.cirp.2021.04.039, Vol. 70:1, pp. 337-340, 2021.
    46. Saleh, M.K.A, Nejatpour, M., Acar, H.Y, Lazoglu, I., “A new magnetorheological damper for chatter stability of boring tools“, Journal of Materials Processing Technology, DOI:10.1016/j.jmatprotec.2020.116931, Vol. 289,  116931, March 2021. 
    47. Khalatbari, H. and Lazoglu I.,  “Friction stir incremental forming of polyoxymethylene: process outputs, force and temperature“, Materials and Manufacturing Processes, DOI: 10.1080/10426914.2020.1819542, Vol. 36 (1), pp. 94-105, 2021.
    48. Aka, I.B,, Ozturk, C., Lazoglu, I., “Numerical investigation of volute tongue design on hemodynamic characteristics and hemolysis of the centrifugal blood pump“, SN Applied Sciences. DOI:10.1007/s42452-021-04142-1, Vol. 3 (1), pp. 1-9, 2021
    49. Malik, A. N., Khan, S.A., Lazoglu, I., “A novel hybrid frost detection and defrosting system for domestic refrigerators“, International Journal of Refrigeration, DOI:10.1016/j.ijrefrig.2020.05.016, Vol. 117, pp. 256-268, 2020.
    50. Subasi, O., Torabnia, S., Lazoglu, I.,  “In silico analysis of superelastic nitinol staples for trans-sternal closure“, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 107,  103770, 2020. 
    51. Hussain A., Layegh S.E.K., Lazoglu I., Arrazola P.J., Lazcano X, Aristimuño P-X., Subasi O, Yigit I.E., Öztürk Ç., Yavaş Ç.,  “Mechanics of milling 48-2-2 gamma titanium aluminide”, CIRP Journal of Manufacturing Science and Technology, DOI:10.1016/j.cirpj.2020.05.001, Vol. 30, pp.131-139, 2020.
    52. Hussain, A., Subasi, O., Lazoglu, I., “A novel sensor using photo-interrupter for measuring static friction coefficient“, Journal of Mechanical Science and Technology. DOI:10.1007/s12206-020-0509-5, Vol. 34(6), 2020. 
    53. Yigit, I.E., Lazoglu, I., “Spherical slicing method and its application on robotic additive manufacturing“, Progress in Additive Manufacturing, DOI: 10.1007/s40964-020-00135-5, 2020. 
    54. Zahoor, A., Hassan, A., Khan, F., Lazoglu, I., “Design of a high thrust density moving magnet linear actuator with magnetic flux bridge“, IET Electrical Power Applications. DOI: 10.1049/iet-epa.2019.0789, 2020. 
    55. Bijanzad, A., Hassan, A., Lazoglu, I., “Development of a new moving magnet linear compressor. Part A: Design and modeling“, International Journal of Refrigeration. DOI:10.1016/j.ijrefrig.2020.02.011,  Vol. 113, pp.70-79, 2020. 
    56. Bijanzad, A., Hassan, A., Lazoglu, I., “Development of a new moving magnet linear compressor. Part B: Performance analysis“, International Journal of Refrigeration. DOI: 10.1016/j.ijrefrig.2020.01.028, Vol. 113, pp.94-102,  2020. 
    57. Mustafa, S.S., Lazoglu, I., “A design framework for build process planning in DMLS“, Progress in Additive Manufacturing. DOI: 10.1007/s40964-020-00110-0, Vol.5, pp. 125-137, 2020. 
    58. Khan, S.A., Lazoglu, I., “Development of additively manufacturable and electrically conductive graphite–polymer composites“, Progress in Additive Manufacturing. DOI: 10.1007/s40964-019-00102-9, Vol. 5, pp. 153-162, 2020. 
    59. Subasi O., Oral A., Lazoglu I., “A novel adjustable locking plate (ALP) for segmental bone fracture treatment“, Injury. DOI:10.1016/j.injury.2019.08.034, Vol 50(3), pp.1612-1619, 2019. 
    60. Yigit, I.E., Lazoglu, I., “Helical slicing method for material extrusion-based robotic additive manufacturing“, Progress in Additive Manufacturing. DOI: 10.1007/s40964-019-00090-w. Vol 4(3), pp. 225-232, 2019. 
    61. Lazoglu I., Kucukaksu D.K., Ozturk C., Aka I.B., Bakuy V., Arat N., Yalcin O., Ugurel E.,, Erkasap P.C., Aksoy E., Ruacan S., “A short-term in vivo evaluation of the Istanbul Heart left ventricular assist device in a pig model”, Experimental and Clinical Transplantation. DOI: 10.6002/ect.2019.0110,  2019. 
    62. Hussain, A., Lazoglu, I., “Distortion in milling of structural parts“, CIRP Annals, Elsevier. DOI: 10.1016/j.cirp.2019.04.053. Vol.68:1, pp. 105-108, 2019. 
    63. Isa, M.A., Lazoglu, I., “Five-axis additive manufacturing of freeform models through buildup of transition layers“, Journal of Manufacturing Systems. DOI:10.1016/j.jmsy.2018.12.002. Vol. 50, pp.69-80, 2019. 
    64. Sezgin, B., Guney, K., Lazoglu, I., Tatar, S., Layegh, E., Ozel, M, Ozmen, S., Yavuzer, R., “Defining a new variable that may impact long-term postoperative nasal tip support”, Annals of Plastic Surgery, DOI:10.1097/SAP.0000000000001600. Vol. 82, pp. 445-451, 2019. 
    65. Ozturk, C., Aka, I.B., Lazoglu, I., “Effect of blade curvature on the hemolytic and hydraulic characteristics of a centrifugal blood pump“, The International Journal of Artificial Organs. DOI:10.1177/0391398818785558. Vol. 41, pp.730-737, 2018. 
    66. Subasi, O., Yazgi, S.G., Lazoglu, I., “A novel triaxial optoelectronic based dynamometer for machining processes“, Sensors & Actuators: A. Physical.  DOI:10.1016/j.sna.2018.06.019. Vol. 279, pp.168-177, 2018. 
    67. Bijanzad, A., Hassan, A., Lazoglu, I., “Electromechanical modeling of a novel moving magnet linear oscillating actuator“, Journal of Mechanical Science and Technology, Springer. DOI 10.1007/s12206-018-0840-2. Vol 32 (9), pp. 4423-4431, 2018. 
    68. Khan, T.I., Sheh Zad, H., Lazoglu, I., Yilmaz, O., “Development of a novel shrouded impeller pediatric blood pump“, Journal of Artificial Organs. DOI: 10.1007/s10047-018-1028-3. Vol. 21(2), pp.142-149,  2018. 
    69. Pekkan, K., Emek, E., Aka, I.B., Tutsak, E., Balim, H., Lazoglu, I., Turkoz, R, “In vitro validation of a self-driving aortic-turbine venous-assist device for the fontan patients“, The Journal of Thoracic and Cardiovascular Surgery.DOI:10.1016/j.jtcvs.2018.02.088. Vol.156 (1), pp.292-301.e7, July 2018. 
    70. Ulasyar, A, Lazoglu, I., “Design and analysis of a new magneto rheological damper for Washing Machine“, Journal of Mechanical Science and Technology, Springer. DOI:10.1007/s12206-018-0308-4. Vol. 32(4), pp. 1549-1561, 2018. 
    71. Sheh Zad, H., Khan,T., Lazoglu, I., “Design and adaptive sliding mode control of hybrid magnetic bearings“, IEEE Transactions on Industrial Electronics,DOI:10.1109/TIE.2017.2739682, Vol: 65:3, 2018. 
    72. Birbilen, U. M., Lazoglu, I., “Design and analysis of a novel miniature tubular linear actuator“, IEEE Transactions on Magnetics. DOI:10.1109/TMAG.2017.2782688. Vol.54,No.4, Sequence number:8202306, 2017. 
    73. Kundakcioglu, E., Lazoglu, I., Poyraz, O., Yasa, E., Cizicioglu, N., “Thermal and molten pool model in selective laser melting process of Inconel 625“, International Journal of Advanced Manufacturing Technology. DOI: 10.1007/s00170-017-1489-1. Vol 95:9, pp.3977-3984, 2018. 
    74. Isa, M.A., Lazoglu, I., “Design and analysis of a 3D laser scanner“, Measurement, Elsevier. DOI: 10.1016/j.measurement.2017.07.028, Vol.111, pp.122-133, 2017. 
    75.  Lazoglu, I., Poulachon, G., Ramirez, C., Akmal, M., Marcon, B., Rossi, F., Krebs, M., “Thermal analysis in Ti-6Al-4V drilling“, CIRP Annals, Elsevier.DOI:10.1016/j.cirp.2017.04.020.  Vol.66:1, pp. 105-108, 2017. 
    76. Layegh, E., Lazoglu, I., “3D Surface topography analysis in 5-axis ball-end milling“, CIRP Annals, Elsevier. DOI:10.1016/j.cirp.2017.04.021. Vol. 66:1, pp.133-136, 2017. 
    77. Hassan, A., Bijanzad, A. Lazoglu, I., “Dynamic analysis of a novel moving magnet linear actuator“, IEEE Transactions on Industrial Electronics. DOI: 10.1109/TIE.2016.2645506. Vol.64, No:5, pp.3758-3766, May 2017. 
    78. Bijanzad, A., Hassan, A., Lazoglu, I., “Analysis of selenoid based linear compressor for household refrigerator“, International Journal of Refrigeration, Elsevier. DOI: 10.1016/j.ijrefrig.2016.10.015.  Vol. 74, pp. 114-126, February 2017. 
    79. Lazoglu, I., Mamedov, A., “Deformation of thin parts in micro milling“, CIRP Annals, Elsevier.  DOI: 10.1016/j.cirp.2016.04.077, Vol. 65:1, pp. 117-120, 2016. 
    80. Mamedov, A., Lazoglu, I.,  “An evaluation of micro milling chip thickness models  gor the process mechanics“, International Journal of Advanced Manufacturing Technology, Springer. DOI: 10.1007/s00170-016-8584-6,  Vol.87, Issue 5, pp.1843-1849, 2016. 
    81. Mamedov, A., Lazoglu, I., “Thermal qnalysis of micro milling Titanium alloy Ti-6Al-4V“, Journal of Materials Processing Technology, Elsevier. DOI: 10.1016/j.jmatprotec.2015.10.019. Vol. 229, pp.659-667, 2016. 
    82. Islam, C., Lazoglu, I., Altintas, Y., “A three-dimensional transient thermal model for machining“, American Society of Mechanical Engineers (ASME), Journal of Manufacturing Science and Engineering. DOI: 10.1115/1.4030305. Vol. 138, Issue 2, pp: 021003-1/021003-17, April 2016. 
    83. Kundakcioglu, E., Lazoglu, I., Rawal, S., “Transient thermal modeling of laser-based additive manufacturing for 3D freeform structures“, International Journal of Advanced Manufacturing Technology, Springer. DOI: 10.1007/s00170-015-7932-2. Vol. 85, Issue 1, pp.493-501, 2016. 
    84. Mamedov, A., Lazoglu, I., “Micro ball-end milling of freeform titanium parts“, Advances in Manufacturing, Springer. DOI: 10.1007/s40436-015-0123-4 , Vol.3, pp.263-268, 2015. 
    85. Bugdayci, B., Lazoglu, I., “Temperature and wear analysis in milling of aerospace grade Aluminum alloy Al-7050“, Production Engineering Research & Development, Springer. DOI: 10.1007/s11740-015-0623-x. Vol. 9, Issue 4, pp 487-494, 2015. 
    86. Celik, A., Lazoglu, I., Kara, A., Kara, F.,”Wear on SiAlON ceramic tools in drilling of aerospace grade CFRP composites“, (doi:10.1016/j.wear.2015.05.009), Wear, Volumes:338-339, pp. 11-21, 2015. 
    87. Celik, A., Lazoglu, I., Kara, A., Kara, F.,  “Investigation on the performance of SiAlON ceramic drills on aerospace grade CFRP Composites“, Journal of Materials Processing Technology, Elsevier. DOI: 10.1016/j.jmatprotec.2015.03.040 . Vol. 223,pp. 39-47, 2015. 
    88. Boz, Y., Erdim, H., Lazoglu, I., “A comparison of solid model and three-orthogonal dexelfield methods for cutter-workpiece engagement calculations in 3 and 5 axis virtual milling“, International Journal of Advanced Manufacturing Technology. DOI: 10.1007/s00170-015-7251-7. Vol 81, 811-823, 2015. 
    89. Layegh, E., Yigit, I.E., Lazoglu, I., “Analysis of tool orientation for 5-axis ball-end milling of flexible parts“, CIRP Annals, Elsevier. DOI:10.1016/j.cirp.2015.04.067 . Vol.64:1, 97-100, 2015. 
    90. Mamedov, A., Layegh, E., Lazoglu, I., “Instantaneous tool deflection model for micro milling“, International Journal of Advanced Manufacturing Technology, Springer. DIO: 10.1007/s00170-015-6877-9. Vol. 79, Issue 5, pp.769-777, 2015. 
    91. Erbulut, D., Zafarparandeh, I., Hassan, C.R., Lazoglu, I., Ozer, A.F., “Determination of biomedical effect of interspinous process device on implanted and adjacent lumbar spinal segments using a hybrid testing protocol: a finite element study“, Journal of Neurosurgery: Spine, DOI:10.3171/2014.12.SPINE14419, May1:1-9, 2015. 
    92. Oktenoglu, T., Erbulut, D.U., Kiapour, A., Ozer, A.F., Lazoglu, I., Kaner, T., Sasani, M., Goel, V.K, “Pedicle screw-based posterior dynamic stabilization of the lumbar spine: In vitro cadaver investigation and a finite element study“, Computer Methods in Biomechanics and Biomedical Engineering, Vol.18, No:11, pp.1252-1261, 2015. 
    93. Lazoglu, I. and Bugdayci, B.,”Thermal modeling of end milling“, CIRP Annals.DOI:10.1016/j.cirp.2014.03.072. Vol. 63:1, pp.113-116, 2014. 
    94. Altintas, Y., Kersting, P., Biermann, D., Budak, E., Denkana, B., Lazoglu, I., “Virtual process systems for part machining operations“, CIRP Annals. DOI:10.1016/j.cirp.2014.05.007. Vol. 63:2, pp.585-605, 2014. 
    95. Fergani, O., Lazoglu, I., Mkaddem, A., El Mansori, M., Liang, S.Y.,  “Analytical modeling of residual stress and the induced deflection of a milled thin plate“, International Journal of Advanced Manufacturing Technology, Springer.DOI:10.1007/s00170-014-6146-3. Vol.: 75, Pages: 455-463, 2014. 
    96. Fergani, Omar; Mamedov, Ali; Lazoglu, Ismail; Yang, Jianguo;Liang, Steven Y., “Prediction of residual stress induced distortions in micro-milling of Al7050 thin plate“, Applied Mechanics and Materials. DOI: 10.4028/www.scientific.net/AMM.472.677. Vol:472, pp.677-681, 2014. 
    97. Erbulut, D.,  Zafarparandah, I., Lazoglu, I., Ozer, A.F., “Application of an asymmetric finite element model of the C2-T1 cervical spine for evaluating the role of soft tissues in stability“, Medical Engineering and Physics, Volume 36, Issue 7, pp. 915-921, 2014. 
    98. Zafarparandah,I., Erbulut, D., Lazoglu, I., Ozer, A.F., “Development of a finite element model of the human cervical spine“, Journal of Turkish Neurosurgery,  Vol. 24:2, pp. 1-7, 2014. 
    99. Erkorkmaz, K., Layegh, E., Lazoglu, I.,Erdim, H.,  “Feedrate optimization for freeform milling considering constraints from the feed drive system and process mechanics“, CIRP Annals, Vol. 62, pp.395-398, 2013. 
    100. Manav, C., Bank, H.S., Lazoglu, I., “Intelligent toolpath selection via multi-criteria optimization in complex sculptured surface milling“, Journal of Intelligent Manufacturing,  Vol. 24, pp. 349-355, 2013. 
    101. Boz, Y., Lazoglu, I., “A postprocessor for table-tilting type five-axis machine tool based on generalized kinematics with variable feedrate implementation“, International Journal of Advanced Manufacturing Technology,  Vol.66, Issue 9-12, 1285-1293, 2013. 
    102. Lazoglu, I., Islam, C., “Modelling of 3D temperature fields for oblique machining“, CIRP Annals, Vol. 61/1, pp.127-130, 2012. 
    103. Altunlu, A.C., Lazoglu, I., Oguz, E., Kara, S., “An investigation on the impact fatigue characteristics of valve leaves for small hermetic reciprocating compressors in a new automated test system“, Fatigue and Fracture of Engineering Materials and Structures, Vol. 35, Issue 9, pp. 826-841, 2012. 
    104. Lazoglu, I., Boz, Y., Erdim, H., “Five-axis milling mechanics for complex free from surfaces“, CIRP Annals, Elsevier.DOI:10.1016/j.cirp.2011.03.090. Vol. 60/1, pp.117-120, 2011. 
    105. Demir, O., Biyikli, E., Lazoglu, I., Kucukaksu, S., “Design of a new centrifugal blood pump: Heart Turcica Centrifugal“, Artificial Organs, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc. DOI: 10.1111/j.1525-1594.2010.01167.x. Vol.35, Issue 7, pp.720-725 , 2011. 
    106. Cerit, E., Lazoglu, I., “A CAM-based path generation method for rapid prototyping applications“, International Journal of Advanced Manufacturing Technology, Vol. 56, pp. 319-327, 2011. 
    107. Basturk,S., Senbabaoglu, F., Islam, C., Erten, M., Lazoglu, I., Gulmez, T., “Titanium machining with new plasma boronized cutting tools“, CIRP Annals, Vol. 59, pp.101-104, 2010. 
    108. Boz, Y. , Demir, O., Lazoglu, I., “Model Based Feedrate Scheduling for Free-Form Surface Machining”, International Journal of Automation Technology, Fuji Technology Press, Japan, pp. 273-283, Vol. 4, No. 3, 2010. 
    109. Senbabaoglu, F., Lazoglu, I., Ozkeser, S., “Experimental analysis of boring process on automotive engine cylinders“, International Journal of Advanced Manufacturing Technology, Vol.48, pp. 11-21, 2010. 
    110. Lazoglu, I., Manav, A.C., Murtezaoglu, Y., “Tool path optimization for free form surface machining“, CIRP Annals, Vol. 58 / 1, pp. 101-104, 2009. 
    111. Ulutan, D., Lazoglu, I.,Dinc, C., “Three dimensional temperature prediction in machining processes using finite difference method“, Journal of Materials Processing Technology, Elsevier Science Ltd., Vol.209, pp.1111-1121, 2009. 
    112. Manav, A.C., Akgun, E., Lazoglu, I., “Improving Free Form Surface Machining Performance by Ball End Milling Model”, International Journal of Design Engineering, Vol.1, No. 4,  pp.434-444, 2008. 
    113. Lazoglu, I., Ulutan, D.,Alaca, B.E., Engin, S., “An enhanced analytical model for residual stress prediction in machining“, CIRP Annals, Vol. 57, Issue:1, pp 81-84, 2008. 
    114. Kaymakci, M.,  Lazoglu, I., “Tool path selection strategies for complex sculptured surface machining“, Machining Science and Technology, An International Journal,  Taylor & Francis Group, Vol.12, Issue 1, pp. 119-132, 2008. 
    115. Dinc, C.,  Lazoglu, I., Serpenguzel, A., “Analysis of thermal fields in orthogonal machining with infrared imaging“, Journal of Material Processing Technology,  Elsevier Science Ltd., Vol. 198, pp.147-154, 2008. 
    116. Otkur, M., Lazoglu, I., “Trochoidal milling”, International Journal of Machine Tools and Manufacture, Elsevier Science Ltd.,  Vol.47, pp.1324-1332, 2007. 
    117. Ulutan, D., Alaca, B. E., Lazoglu, I., “Analytical modeling of residual stresses in machining“, Journal of Materials Processing Technology, Elsevier Science Ltd.,  Vol. 183, Issue 1, pp.77-87, 2007. 
    118. Erdim, H., Lazoglu, I., Kaymakci, M., “Free-form surface machining and comparing feedrate scheduling strategies“, Machining Science and Technology,  An International Journal, Taylor & Francis Group, Vol. 11, Issue 1,  pp.117-133, 2007. 
    119. Kaymakci, M., Lazoglu, I., Murtezaoglu, Y., “Machining of complex sculptured surfaces with feedrate scheduling”, International Journal of Manufacturing Research, Special Edition on Sculptured Surfaces, Inderscience Publishers, Vol.1, No.2, pp.157-175, 2006. 
    120. Lazoglu, I., Kratz.H., Buyukhatipoglu, K., Klocke, F., “Forces and temperatures in hard turning“, Machining Science and Technology,  An International Journal, Taylor & Francis Group, Vol.10, No:2, pp. 157-179,  2006. 
    121. Erdim, H., Lazoglu, I., Ozturk, B., “Feedrate scheduling strategies for free-form surfaces“,  International Journal of Machine Tools and Manufacture, Elsevier Science Ltd., Vol. 46, pp.747-757, 2006. 
    122. Ozturk, B., Lazoglu, I.,  “Machining of free-form surfaces – part I: Analytical chip load” International Journal of Machine Tools and Manufacture, Elsevier Science Ltd., Vol.46, pp.728-735, 2006. 
    123. Ozturk, B., Lazoglu, I., Erdim, H.,  “Machining of free-form surfaces – part II: Calibration and forces“, International Journal of Machine Tools and Manufacture, Elsevier Science Ltd., Vol.46, pp.736-746, 2006. 
    124. Pirtini, M. and Lazoglu, I. “Forces and hole quality in drilling“, International Journal of Machine Tools and Manufacture, Elsevier Science Ltd., 45/11 pp. 1271-1281, 2005. 
    125. Guzel, B.U.,  Lazoglu, I., “An enhanced force model for sculptured surface machining“, Machining Science and Technology, An International Journal,  Marcel-Dekker Inc., Vol. 8, No. 3, pp.431-448, 2004. 
    126. Budak, E., Lazoglu, I., Guzel, B.U., “Improving cycle time in sculptured surface machining sculptured surface machining through force modeling“, CIRP Annals, Vol.53/1, pp.103-106, 2004. 
    127. Guzel, B.U and  Lazoglu I., “Increasing productivity in sculptured durface machining Via off-line piecewise variable feedrate scheduling based on the force system model“, International Journal of Machine Tools and Manufacture, Elsevier Science Ltd., Volume 44, Issue 1, Pages 21-28, January 2004. 
    128. Lazoglu,I., “Sculpture surface machining: A generalized model of ball-end milling force system“, International Journal of Machine Tools and Manufacture, pp.453-462, Vol. 43, April 2003. 
    129. Atabey, F., Lazoglu, I., Altintas, Y., “Mechanics of boring processes–part I“, International Journal of Machine Tools and Manufacture, pp.463-476, Vol. 43, April 2003. 
    130. Atabey, F., Lazoglu, I., Altintas, Y., “Mechanics of boring processes–part II: Multi-insert boring heads“, International Journal of Machine Tools and Manufacture, pp.477-484, Vol. 43, April 2003. 
    131. Lazoglu, I., Atabey, F.  and Altintas, Y.,  “Dynamics of boring processes–part III: Time domain modeling“, International Journal of Machine Tools and Manufacture, pp. 1567-1576, Volume 42, November 2002. 
    132. Lazoglu, I. and Altintas, Y., “Prediction of tool and chip temperature in continuous and interrupted machining“, International Journal of Machine Tools and Manufacture, pp. 1011-1022, Volume 42, Issue 9, July 2002. 
    133. Lazoglu, I. and Liang, S.Y., “Modeling of ball-end milling forces with cutter axis inclination“, the ASME Journal of Manufacturing Science and Engineering, pp. 3-11, Volume 122, 2000. 
    134. Ehmann, F.K, Kapoor, S.G., DeVor, R.E., Lazoglu, I. “Machining process modeling: A review“, an invited paper in the 75th Anniversary Issue of the ASME Journal of Manufacturing Science and Engineering, Vol. 119, pp. 655-663, 1997. 
    135. Lazoglu, I. and Liang, S.Y., “Analytical modeling of ball-end milling forces“, Machining Science and Technology,  An International Journal, Marcel-Dekker Inc., Vol. 1, Issue 2, pp. 219-234, 1997.

Refereed Conferences:

    1. Oral, A., Haque, U.U., Yalçın, Ö., Lazoglu, I., “Parametric analysis in crankshaft design for the reciprocating compressors”, 13th International Conference on Compressors and their Systems, 11-13 September 2023, London, UK,
    2. Bilgili, D., Kecibas, G., Besirova, C., Chehrehzad, M.R., Burun, G., Pehlivan, T., Uresin, U., Emekli, E., Lazoglu, I., “Tool flank wear prediction using high-frequency machine data from industrial edge device”, 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 13-15 July 2022, Naples, Italy. Procedia CIRP, Vol. 118, pp. 483-488, 2023.
    3. Malik, A.N.; Pashak, P.; Lazoglu, I; Şahin, Ç., “A low-cost photoelectric based displacement measurement system to quantify valve lift motion in reciprocating type compressors”, Herrick Conferences, July 10-14, 2022, Purdue, USA.
    4. Oral, A.; Lazoglu, I.; Kerpicci, H.; Tuysuz, S., “Mathematical model for the mechanical losses and validation experiments”, Herrick Conferences, July 10-14, 2022, Purdue, USA.
    5. Beşirova, C., Akhtar, W., Shahzad, A., Üresin, U., Çelikel, S., Halifeoğlu, S., İrican, M., Lazoğlu, I., “Analysis of machining process with data collection using industrial edge computing”,  11th International Conference on Machining, 2021.
    6. Torabnia, S., Mihcin, Ş., Lazoglu, I., “Parametric analysis for the design of hip joint replacement simulators“, 16th IEEE International Symposium on Medical Measurements and Applications (MeMeA),  DOI:10.1109/MeMeA52024.2021.9478689, 23-25 June 2021, Neuchâtel, Switzerland. 
    7. Hussain A., Layegh S.E.K., Lazoglu, I., Subasi, O., Yigit, I.E.,  Öztürk, Ç., Yavaş, Ç., “Free-Form Ball-End Milling of 48-2-2 Gamma Titanium Aluminide”, UTIS 2019, November 2019, Antalya, Turkey.
    8. Khan, S. A., Lazoglu, I., “De-Icing Using Additively Manufactured Heating Element”, AMCTURKEY 17-18 October 2019, Istanbul, Turkey.
    9. Yigit, I.E., Lazoglu, I., “Dynamic Build Bed for Additive Manufacturing”, The 30th Annual International Solid Freeform Fabrication Symposium, August, 2019, Austin, TX, USA. 
    10. Yigit, I.E., Isa, M. Lazoglu, I., “Additive Manufacturing with Modular Support Structures”, The 29th Annual International Solid Freeform Fabrication Symposium, August 13-15, 2018, Austin, TX, USA. 
    11. Isa, M., Yigit, I.E., Lazoglu, I., “Analysis of Additive Manufacturing Build Direction on Overhang Structures”, The 29th Annual International Solid Freeform Fabrication Symposium, August 13-15, 2018, Austin, TX, USA. 
    12. Hussain A, Lazoglu I, Layegh S.E., Yavaş C., “Machining of γ-TiAl”, 9th International Congress on Machining, Nov. 2018, Antalya, Turkey. 
    13. Mustafa, S.S., Lazoglu, I., “Design and development of an additive manufacturing system for metal printing”, 18th International Conference on Machine Design and Production, July 3-6,2018, Eskisehir, Turkey. 
    14. Isa, M. A., Lazoglu, I., “Using multi-axis additive manufacturing in support-less part fabrication”, 18th International Conference on Machine Design and Production, July 3-6,2018, Eskisehir, Turkey. 
    15. Yigit, I.E., Lazoglu, I., “Robotic additive manufacturing of tooling for composite structures”, 18th International Conference on Machine Design and Production, July 3-6,2018, Eskisehir, Turkey. 
    16. Kucukaksu, D.S., Lazoglu, I., Aka, I.B., Ozturk, C., Arat, N., Bakuy, V., Aksoy, E., Erkasap, P., Ugurel, E., Yalcin, O., Ruacan, S., “The Results Of Experimental Animal Study Of The First Left Ventricular Assist Device Of Turkey: Istanbul Heart Vad (iheart® Vad)”, the 14th International Congress of Update in Cardiology and Cardiovascular Surgery, April 5-8, 2018, Antalya, Turkey. 
    17. Yazgi, S.G., Subasi, O., Lazoglu, I., “Development of a Novel Mini Dynamometer: DynoMARC”, 8th International Congress on Machining, Nov. 8-10, 2017, Antalya, Turkey. 
    18. Akmal M., Yazgi, S.G., Lazoglu I., Akgun, A., Yavas, C., “Friction Analysis on AlTiN Coated and Uncoated Carbide Tools in Milling of Al7050”, 8th International Congress on Machining, Nov. 8-10, 2017, Antalya, Turkey. 
    19. Akmal M., Layegh, E., Lazoglu I., Akgun, A., Yavas, C., “Friction Coefficients on Surface finish of AlTiN Coated Tools in the Milling of Ti6Al4V”, 16th CIRP Conference on Modeling of Machining Operations, June 2017, Cluny, France. DOI:10.1016/j.procir.2017.03.231. Procedia CIRP, pp.596-600, 2017. 
    20. Shams, S., Lazoglu, I., “A Monolothic Opto-coupler based Sensor for Contact Force Detection in Artificial Hand”, IEEE Explore, 978-1-5090-4059-9/16, pp. 186-189, 2016. 
    21. Akmal, M., Layegh, E., Lazoglu, I., Akgun, A., Yavas, C., “Analysis of Surface Finishing Techniques and Coating Materials in High Performance Milling of Aerospace Grade Titanium Alloys”, 17th International Conference on Machine Design and Production, July 12-15, 2016, Bursa, Turkey 
    22. Khalatbari, H., Lazoglu, I., Durgun, I., “Implicit Finite Element Simulation of Incremental Sheet Forming Process”,17th International Conference on Machine Design and Production, July 12-15, 2016, Bursa, Turkey. 
    23. Mamedov, A. and Lazoglu, I., “Temperature Modeling of Micro Milling Process”, 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM21 2015, Kyoto, Japan, October 2015. 
    24. Layegh, E., Yigit, I.E., Lazoglu, I., “A Solid Modeler Kernel based Engagement Model for 5-axis Ball End Milling”,  15th CIRP Conference on Modeling of Machining Operations, Procedia CIRP,  Karlsruhe, Germany,  2015. 
    25. Fergani, O., Shao, Y.,  Lazoglu, I.,  Liang, S.Y., “Temperature Effects on Grinding Residual Stress”,  6th CIRP International Conference on High Performance Cutting, HPC2014, Univ. of California Berkeley,  USA, June 2014. / Procedia CIRP, Volume 14, pp.2-6, 2014. 
    26. Layegh, E., Lazoglu, I., “A New Identification Method of Specific Cutting Coefficients for Ball End Milling”,  6th CIRP International Conference on High Performance Cutting, HPC2014, Univ. of California Berkeley,  USA, June 2014. / Procedia CIRP, Volume 14, pp.182-187, 2014. 
    27. Mamedov, A., Yigit, I.E., Lazoglu, I., “Force Model for Micro Milling of Free Form Surfaces”, 16th International Conference on Machine Design and Production, June 30-July 03, 2014, Izmir, Turkey. 
    28. Layegh, S.E.K., Yigit, I.E., Lazoglu, I., “The Effect of Tool Orientation on Five Axis Ball End Milling of Ti6Al4V”, 16th International Conference on Machine Design and Production, June 30-July 03, 2014, Izmir, Turkey. 
    29. Ozgen, B., Lazoglu, I., Durgun, I., “Experimental Investigation of the Process Parameters on the Forming Forces for Single Point Incremental Forming”, 16th International Conference on Machine Design and Production, June 30-July 03, 2014, Izmir, Turkey. 
    30. Comert, S., Ozturk, C., Lazoglu, I., Yalcin, O., Atac, N., Kucukaksu, S., “In Vitro Hemolytic Performance Evaluation of a New Implantable Centrifugal Heart Pump (Istanbul VAD) with an Optimized Design”,  International Society of Rotary Blood Pump Conference, San Francisco, CA, USA, Publisher: Artificial Organs, Sept., 2014 
    31. Fergani, O., Mamedov, A.,Lazoglu, I, Yang, J.,Liang, S.Y.,Prediction of residual stress induced distortions in micro-milling of Al7050 thin plate,  4th International Conference on Mechanical Science and Technology (ICMSE 2014), Jan, 2014, Sanya, Peoples R. China, Publisher: Trans Tech Publications Ltd, Switzerland, 2014. 
    32. Buyukyazi, T., Bayraktar, S., Lazoglu,I., “A Novel Mosaic Quality Measurement Method For UAV Surveillance and Remote Sensing”, International Society of Photogrammetry and Remote Sensing (ISPRS) 2013,  Antalya, International Society of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Vol.: XL-7/W2, Pages: 55-60, Nov., 2013. 
    33. Mamedov, A., Layegh, K.S.E., Lazoglu, I., “Machining Forces and Tool Deflections in Micro Milling”, 14th CIRP Conference on Modeling of Machining Operations, Torino, Italy, June 13th – 14th, 2013./ Procedia CIRP, Volume 8, pp. 147-151, 2013. 
    34. Layegh, S.E., Lazoglu, I., Erdim, H., “Tool Deflection in Five-Axis Milling”, 7th International Conference on  Design and Production of Machines and Dies/Molds, Antalya, Turkey, 2013. 
    35. Layegh, E., Erdim, H., Lazoglu, I., “Offline Force Control and Feedrate Scheduling for Complex Free From Surfaces in 5-Axis Milling”, 5th CIRP High Performance Cutting Conference, Zurich-Switzerland, 4-7 June 2012. 
    36. Layegh, S.E., Lazoglu, I., Erdim, H., “Effects of Lead and Tilt Angels on Cutting Forces, Torque and Cutting Power in Five-Axis Sculptured Surface Milling”, 15th International Conference on Machine Design and Production, Denizli, Turkey, 2012. 
    37. Bank, H.S., Lazoglu, I., “Development of a New Hybrid Laser Workstation for Additive Manufacturing and Laser Machining”, 15th International Conference on Machine Design and Production, Denizli, Turkey, 2012. 
    38. Fergani, O., Lazoglu, I., Amon, L., Engin, S., “Three Dimensional Model for Predicting Residual Stresses in Oblique Machining based on Contact Mechanics”, 15th International Conference on Machine Design and Production, Denizli, Turkey, 2012. 
    39. Bugdayci, N.B., Lazoglu, I., Akcay, R., “Comparative Study on Performance of Different Helical End Mills in Milling of Al-7050”, 15th International Conference on Machine Design and Production, Denizli, Turkey, 2012. 
    40. Fergani, O., Bugdayci, N.B., Atalay, F., Ozdemir, O., Lazoglu, I., Akcay, R., “Bone Milling: Heat Generation and the Effects of Osteon Orientation on the Cutting Forces”, 15th International Conference on Machine Design and Production, Denizli, Turkey, 2012. 
    41. Boz, Y., Erdim, H., Lazoglu, I., “Modeling Cutting Forces for Five Axis Milling of Sculptured Surfaces”, 13th CIRP Conference on Modeling of Machining Operations, Sintra-Lisbon, Portugal, 2011. / Advanced Materials Research Vol. 223 (2011), pp.701-712. 
    42. Boz, Y., Erdim, H., Lazoglu, I., “Prediction of Cutting Forces for 5-Axis Ball-End Milling of Free-Form Surfaces”, Proceedings of 4th CIRP International Conference on High Performance Cutting, Gifu, Japan, October  2010.\ 
    43. Altunlu, A.C., Lazoglu, I., Oguz, E., Kara, S., “Impact Fatigue Characteristics of Valve Leaves for Small Hermetic Reciprocating Compressor”, International Compressor Engineering Conference at Purdue, USA, July  2010. 
    44. Demir, O.,Islam, C., Lazoglu, I., Aygin, E.,Sipahioglu, C.,Ilgaz, O.,Ates, O., “Thermal and Mechanical Analysis of Machining Ti6Al4V and Inconel718”,  14th International Conference on Machine Design and Production, N.Cyprus, June 2010. 
    45. Boz., Y., Lazoglu, I., “A Generic Postprocessor for Table-Tilting Type Five-Axis Machine Tool with Variable Feedrate”,  14th International Conference on Machine Design and Production, N.Cyprus, June 2010. 
    46. Boz., Y., Erdim, H., Lazoglu, I., “Modeling Cutting Forces for 5-Axis Machining of Sculptured Surfaces”,  CIRP-International Conference on Process Machine Interactions, Vancouver, Canada, June 2010. 
    47. Manav, C., Bank, S.H., Lazoglu, I., “Multi-Criteria Toolpath Optimization For Free Form Surface Machining”,  CIRP-International Conference on Process Machine Interactions, Vancouver, Canada, June 2010. 
    48. Lazoglu, I., Ulutan, D., Alaca, B.E., Engin, S., “An Enhanced Analytical Model for Residual Stress Prediction in Machining”,  58th CIRP General Assembly, Manchester, England, August 2008. 
    49. Manav, C.A., Akgun, E., Lazoglu, I., ” Process Optimization of Free Form Surface Machining”, Proceedings of the 13th International Conference on Machine Design and Production, pp. 217-228, Istanbul, September 2008. 
    50. Cerit, E., Demir, O., Lazoglu, I., “Development of An Open-Architecture Rapid Prototyping System”, Proceedings of the 13th International Conference on Machine Design and Production,  pp. 149-156, Istanbul, September 2008. 
    51. Lazoglu,I., Ulutan, D., Dinc, C., “3D Temperature Fields in Machining”, 3rd CIRP International HPC Conference, Dublin, Ireland, June 2008. 
    52. Kaymakci, M. and Lazoglu, I., “Tool Path Selection Strategies for Complex Sculptured Surfaces”, 10th CIRP International Workshop on Modeling of Machining Operations, Calabria, Italy, August 2007. 
    53. Dinc, C., Lazoglu, I., Serpenguzel, A., “High Precision Infrared Thermal Measurements in Orthogonal Machining”, Conference on Design and Production of Machines and Dies/Molds, DM-30, Cesme / Izmir, Turkey, June 2007. 
    54. Otkur, M., Lazoglu, I., “Tool Wear in Trochoidal Hard Milling”, Conference on Design and Production of Machines and Dies/Molds, DM-31, Cesme / Izmir, Turkey, June 2007. 
    55. Lazoglu, O. Demir, G. Yildiz, C. Ersanli, S. Kucukaksu, A. F. Okyar, N. Ciblak, M. Sehirlioglu, M. Akgun, E. Sorguven, H. Ahn, K. Safak, N. Egrican, “From Concept to the Prototype of Heart Turcica Centrifugal:Development of the First Implantable Centrifugal Left Ventricular Assist System in Turkey”, 1. National Artificial Organs and Support Systems Congress, Istanbul / Turkey, June 2007. 
    56. Ciblak, N., Okyar, A. F., Sorguven,  E. , Akgun, M. A. , Kucukaksu, S., Ahn H., Safak,K., Egrican, N., Ozsoy,B., Yenigul, O., Sehirlioglu,  M.,  Lazoglu, I., Budak, E., “Analysis and Development of Heart Turcica Axial: Development of the First Implantable Axial Left Ventricular Assist System in Turkey”, 1. National Artificial Organs and Support Systems Congress, Istanbul / Turkey, June 2007. 
    57. Küçükaksu, S., Göksedef, D., Bülbül,S., Yıldız, C. E., Lazoglu, I., N. Çıblak, Akgün, M., Okyar, A. F., Sorgüven, E., Şafak, K., Ahn,  H.,  Şehirlioğlu,M., Uçak,C., Eğrican, N., “Development of the First Turkish Miniature and Implantable Centrifugal Heart Pump Support System: Heart Turcica-2”,  9th  National Congress of Turkish Society of Cardiovascular Surgery,  Antalya / Turkey, November 2006. 
    58. Otkur, M., Lazoglu, I., “Trochoidal Milling”, The CIRP International Conference on High Performance Cutting, Vancouver, BC, Canada, June, 2006. 
    59. Erdim, H., Lazoglu, I., Kaymakci, M.,”Free-Form Surface Machining and Comparing Feedrate Scheduling Strategies”, The CIRP International Conference on High Performance Cutting, Vancouver, BC, Canada, June, 2006. 
    60. Erdim, H., Lazoglu, I., “Feedrate Scheduling Strategies for Free-Form Surfaces”, Proceedings of the Japan Society of Mechanical Engineers – International  Conference on Leading Edge Manufacturing in 21st Century (LEM21), pp.1121-1126, Nagoya, Japan, October, 2005. (H. Erdim received “The Outstanding Young Researcher Award” for this paper from the Japan Society of Mechanical Engineers- LEM21 Conference Organizing Committee) 
    61. Ozturk, B., Lazoglu, I., “An Analytical Model for Engagement Regions in Machining of 3D Free-Form Surfaces”, Proceedings of the Japan Society of Mechanical Engineers – International  Conference on Leading Edge Manufacturing in 21st Century (LEM21),  pp.1127-1132, Nagoya, Japan, October, 2005. 
    62. Buyukhatipoglu, K., Lazoglu, I.,  Kratz, H. and Klocke, F., “Mechanics and Dynamics of Hard Turning Process”, American Society of Mechanical Engineers – International Mechanical Engineering Congress, Proceedings of IMECE04, MED / IMECE2004-61067, Anaheim, California – USA, November, 2004. 
    63. Pirtini, M., Lazoglu, I., “Dynamic Forces and Hole Quality in Drilling Process”, American Society of Mechanical Engineers – International Mechanical Engineering Congress, Proceedings of IMECE04, MED / IMECE2004-61065,  Anaheim, California – USA, November, 2004. 
    64. Guzel, B.U.,  Lazoglu, I., Huang,  X.,  Yip-Hoi, D., Erdem,H., Ozturk, B., “Improving Productivity in Die and Mold Machining”, CIRP International Conference on Design and Production of Dies and Molds, pp.25-35, Bursa, June 2004. 
    65. Guzel, B.U. and  Lazoglu I., “Sculpture Surface Machining”, Proceedings of The Japan Society of Mechanical Engineers – International   Conference on Leading Edge Manufacturing in 21st Century, pp. 473-478, Niigata, Japan, November 2003. 
    66. Lazoglu, I., Buyukhatipoglu, K. and Altintas, Y. , “Temperature Predictions in Machining”, Proceedings of The Japan Society of Mechanical Engineers – International  Conference on Leading Edge Manufacturing in 21st Century, pp. 645-650, Niigata, Japan, November 2003. 
    67. Ostafiev, D., Lazoglu, I., Atabey, F., and Altintas, Y., “Mechanics and Dynamics of Boring Processes”, Proceedings of the 6th CIRP International Workshop on Modeling Machining Operations, pp. 131-149, May 2003, McMaster University, Hamilton, Ontario, Canada. 
    68. Lazoglu, I., “Generalized Mechanistic Force System Model of Ball End Milling Force System for Sculpture Surface Machining”, Proceedings of the Manufacturing Engineering Division, the ASME International Mechanical Engineering Congress, New York, November 2001. 
    69. Lazoglu, I., “Mechanistic Modeling of Ball End Milling Force System for Machining of Sculpture Surfaces”, CIRP 2nd International Conference and Exhibition on Design and Productions of Dies and Molds, Kusadasi, Turkey, DM 06, May, 2001. 
    70. Lazoglu, I. and Altintas, Y., “Prediction of Tool and Chip Temperature in Continuous Metal Cutting and Milling”, The ASME International Mechanical Engineering Congress, Manufacturing Engineering Division (MED)-Vol 11, Orlando, November 2000. 
    71. Lazoglu, I., Vogler, M., Kapoor, S.G., DeVor, R.E. “Dynamics of the Simultaneous Turning Process”, Transactions of the North American Manufacturing Research Conference, NAMRC XXVI, pp. 135-140, 1998. 
    72. DeVor, R.E., Kapoor, S.G., Zhu, R., Jacobus, K., Lazoglu, I., Sastry, S., Vogler, M., “Development of Mechanistic Models For the Prediction of Machining Performance: Applications to Process and Product Quality”, C.I.R.P. International Workshop on Modeling of Machining Operations, p. 2D/5-1, 1998 
    73. Lazoglu, I. and Liang, S.Y., “An Improved Analytical Modeling of Force System in Ball-End Milling”, American Society of Mechanical Engineers (ASME) International Mechanical Engineering Congress, MED-Vol. 6-2, Manufacturing Science and Technology, Vol. 2, pp. 135-142, 1997. 
    74. Lazoglu, I. and Liang, S.Y., “Feedrate Optimization on Complex Workpieces for CNC Milling Machines”, the Physics of Machining Processes III (editors: D.A. Stephenson and R.A. Stevenson), the TMS Publication, pp. 129-138, 1996. 
    75. Lazoglu, I. and Liang, S.Y., “Milling Force Analysis for Complex Workpieces”, Proceedings of Thirteenth Symposium on Engineering Applications of Mechanics, Manufacturing Science and Engineering, the Canadian Society of Manufacturing Engineering Forum, pp. 373-381, 1996. 
    76. Lazoglu, I. and Liang, S.Y., “Analysis of Force System in Ball-End Milling”, ASME International Mechanical Engineering Congress, Manufacturing Science and Engineering, MED, Vol. 2-1, MH. Vol. 3-1, pp. 179-187, 1995. 
    77. Lazoglu, I. and Liang, S.Y., “Dynamic Cutting Forces in Ball-End Milling”, Proceedings of International Conference on Recent Advances in Mechatronics, Vol. II, pp. 940-945, 1995.

Teaching:

     Mech 542 – Mechatronics

     Mech 543 – Computer Integrated Manufacturing and Automation

     Mech 550 – Additive Manufacturing

     Mech 536 – ManuFuture

     Mech 203 – Introduction to Mechanical Engineering Design (Computer Aided Design)

     Mech 206 – Dynamics